50 Mesh Food Grade Nylon mesh for water filter
Nylon filter mesh is highly resistant to abrasion and mechanical strain, and many chemicals.
The production according to ISO9001 quality management system. Mesh produced are from 30 micron to 1000 micron with the maximum width of 365cm. Our annual capacity is more than 5 million square meters. Goods exports to NORTH AMERICA, SOUTH AMERICA, EUROPE, ASIA, MIDDLE EAST and AFRICA.
Product Features
- Manufactured by 100% nylon
- No unwanted chemicals, no any chemicals treatment in the production process
- Very safe, very thin, food grade
- Can made by disc, tube, piece, roll any sizes and shape, max roll length 1000m
- High tensile, working temperature under 200ºC
- Very good dimensional stability
1. Due to their uniformity they can be woven with great precision to give exact and regular apertures
2. The resulting material has a very smooth surface so that the filtered particles will easily separate
3. They have high tension and low elongation
Main specification
Opening size: From 5 micron to 2000 micron
Material: PA6(Nylon)
Width range from: 0.6m-3.68m
Technical Info
Nylon filter mesh is recommend used in following applications:
Temperature for continuous work: 212ºF(ºC)
Chemical resistance: PH 7-14
Neutral or alkali
We can cut the mesh into rolls, disc, ribbons, tubes according to customers order
We could also make longer nylon mesh rolls
Production process
Material yarn from Jintong, Switzerland and Japan, we inspect those yarn arrived (tolerance, tensile strength, physics test etc.).
During production, first we put the warp wires on the beam, drawing the warp wires into heddle and reed. Then our experienced weaver will start weaving mesh according to orders.
Initial survey is taken during and after weaving. Then the heat setting treatment and physical properties inspection will be done before we get tentative finished rolls (normally 60-500 meters rolls).
In the end, after the final inspection, we will cut the mesh into small rolls (20m-50m) according to customer orders.
Quality Grade
The production of nylon mesh is according to ISO9001 quality management system. Mesh produced are from 10 mesh per inch to 330 mesh per inch (4T-130 T in cm) with the maximum width of 368cm. Our annual capacity is more than 5 million square meters. Goods exports to NORTH AMERICA, SOUTH AMERICA, EUROPE, ASIA, MIDDLE EAST and AFRICA.
Close view of our nylon mesh
Good products never afraid of looking closely.
Please kindly check the detailed image under the microscope.
MAISHI produce nylon mesh filter cloth with 100% nylon, absolutely square hole, exact mesh counts per inch, and clear hole sizes.
While some of the suppliers offer nylon mesh with other mixture materials, so the wire performance is not very good. And their wire has flying edges, which will influence the ink put through. The hole size is not square, which will make the printing effect bad, and the wrong mesh count will take big damage to customers' filtering and printing.
Quality Control
High quality nylon filter mesh is guaranteed by the usage of high tensile, low elongation, direct spinning monofilament 100% PA6 nylon yarns (not split yarns which are weak), strict quality control in each production process and final inspection by our Quality Control System. At Final Inspection, every meter of fabric is inspected for any kind of fault according to our Quality Control System. Only tested, approved, without-fault, A-Grade fabric is sold to our customers.
Packing &Shipping
We have two kind of packing type:
Most of the meshes are
in stock, and could be
deliver within 5-7 days.
){kind=link}
){kind=link}