SL62 72 82 Concrete Reinforcing Mesh for Construction
Concrete Reinforcing Mesh also known as steel reinforcing mesh,welded wire fabric,ribbed steel bars welded mesh and so on. Be made from cold reduced Wire or cold rolled ribbed bars(CRB550) , It is in the same or different diameters of the vertical and horizontal steel bars , and has a rectangular or square apertures and is produced in flat sheets.
It is used to provide tensile strength and crack control to structural concrete elements.
1. Specifications
MAISHI offer a wide range of concrete steel reinforcing meshes
>> AS/NZS 4671 standard
Square Mesh AS/NZS 4671- Class L
| Product Code |
Std Unit |
Longitudinal Wires |
Cross Wires |
Mass(kg) |
Dimensions(m) |
| SL52 |
sheet |
10×4.77@200+4×4@100 |
30×4.77@200 |
21 |
6×2.4 |
| SL62 |
sheet |
10×6@200+4×4.77@100 |
30×6@200 |
33 |
6×2.4 |
| SL72 |
sheet |
10×6.75@200+4×4@100 |
30×6.75@200 |
41 |
6×2.4 |
| SL81 |
sheet |
25×7.6@100 |
60×7.6@200 |
105 |
6×2.4 |
| SL82 |
sheet |
10×7.6@200+4×5.37@100 |
30×7.6@200 |
52 |
6×2.4 |
| SL92 |
sheet |
10×8.6@200+4×6@100 |
30×8.6@200 |
66 |
6×2.4 |
| SL102 |
sheet |
10×9.5@200+4×6.75@100 |
30×9.5@200 |
80 |
6×2.4 |
| ×Diameter (mm) × Spacing (mm) |
Rectangular Mesh AS/NZS 4671 - Class L
| Product Code |
Std Unit |
Longitudinal Wires |
Cross Wires |
Mass(kg) |
Dimensions(m) |
| RL718 |
sheet |
25×6.75@100 |
30×7.6@200 |
67 |
6×2.4 |
| RL818 |
sheet |
25×7.6@100 |
30×7.6@200 |
79 |
6×2.4 |
| RL918 |
sheet |
25×8.6@100 |
30×7.6@200 |
93 |
6×2.4 |
| RL1018 |
sheet |
25×9.5@100 |
30×7.6@200 |
109 |
6×2.4 |
| RL1118 |
sheet |
25×10.7@100 |
30×7.6@200 |
130 |
6×2.4 |
| RL1218 |
sheet |
25×11.9@100 |
30×7.6@200 |
157 |
6×2.4 |
>> BS 4483 standard
Like A393 / A252 / A193 / B1131 / B785 / B503 reinforcement mesh, etc.
Most of the meshes are with flying end. Flying end mesh as the most special produts in reinforced mesh. When we connect two sheet flying end mesh reinforced togerther, there is not build-up of overlapping with each other, therefore, this connection way is keeping minmum height of joint mesh place absolutely.
Other standards and mesh sizes could also be made as per your request.
2. Product Knowledge
Normally the longitudinal wire and cross wire is the same, the edge wire is much moe thinner and the edge opening small. Which makes easier to weld sheets together.
If the mesh opening is 200mm, normally the edge opening is 100mm, then the whole opening will be 200mm when two sheets welded together.
If no edge wire, the user have to tie two mesh sheets by wire.
Longitudinal wire dia. x longitudinal wire dia. x 0.00617 x mesh length x numbers of wire in width direction + cross wire dia. x cross wire dia. x 0.00617 x mesh width x numbers of wire in length direction + edge wire dia. x edge wire dia. x 0.00617 x mesh length x 2=KG/sheet
3. Packing & Loading
1. Load into the container one piece by one piece.
2. Several pieces tie into one bundle, several bundles put onto the pallet.
3. Mesh sheets load onto the pallets
4. Application
Retaining and shear walls
Beams and columns
Concrete paving overlays
Precast concrete elements
Suspended floor slabs
Swimming pool and gunite construction
5. Guarantee
1.We guarantee our customers will get right material and sizes,enough weight,on time delivery at our best service and price
2.The goods can be returned or compensated if the quality is not ok
3.There is no "cheat" and "misunderstanding" in Maishi
6. Payment term
1)100%T/T in advance if order amount less than USD10000.00
2) 30% paid in advance and 70% balance paid before shipment if order amount more than USD10000.00.
3) Irrevocable L/C at sight.
Any other payment term can be negotiatory.
To serve you best we appreciate getting the following information :
1.Material:Low-carbon Iron wire
2.Opening size
3.Wire diameter
4.Roll or pallets, sizes
5.Quantity
At your service all the time and welcome your inquiry.You are the reason why we are here.
Audited Supplier 
){kind=link}
){kind=link}